视频二区_天天天天天天天干_av片免费观看_欧美日韩一_国产欧美三区_91亚洲国产精品

current location: Home   >> News >> Company news

Characteristics and use of globe valve

Features and USES of globe valve:

A globe valve is a valve in which the closing member (disc) moves along the center line of the seat. According to this type of disc movement, the change of seat opening is directly proportional to disc travel. Because of this type of valve stem opening or closing stroke is relatively short, and has a very reliable cut-off function, and because of the change of valve seat opening and disc stroke is proportional, very suitable for the flow regulation. Therefore, this type of valve is very suitable for cutting or regulating and throttling.

Once the disc of pneumatic globe valve is moved from the closed position, there is no longer contact between its seat and the sealing surface of the disc, so its sealing surface has little mechanical wear, so its sealing performance is very good, the disadvantage is that the sealing surface may be clamped between the particles in the flowing medium. However, if the disc is made into a ball of steel or porcelain, this problem can be overcome. Because most globe valves have seats and discs that are easy to repair or replace, and do not require the entire valve to be removed from the line when repairing or replacing the sealing element, this is especially true where the valve and the line are welded together.

Due to a change in the flow direction of the medium through such valves, the Z small flow resistance of electric globe valves is also higher than that of most other types of valves. However, this condition can be improved depending on the body structure and stem layout relative to the inlet and outlet channels. At the same time. Due to the small travel between the globe disc opening and closing, and the sealing surface can withstand multiple opening and closing, it is suitable for frequent switching occasions.

The obvious advantages of globe valves are:

(l) in the process of opening and closing, the friction between the disc and the sealing surface of the valve body is less than that of the gate valve, so it is wear-resistant.

(2) the opening height is generally only l / 4 of seat channel diameter, so it is much smaller than gate valve.

(3) usually there is only one sealing surface on the valve body and disc, so the manufacturability is better and it is easy to maintain. However, the disadvantages of oxygen globe valve can not be ignored. The main disadvantage is that the coefficient of flow resistance is relatively large, resulting in pressure loss, especially in the hydraulic device, this pressure loss is particularly obvious.

The globe valve is mainly used for cutting off in the pipeline. Globe valves have the following advantages:

1. In the process of opening and closing the sealing surface friction is less than the gate valve, wear resistance.

2. Low opening height.

3. Usually there is only one sealing surface, with good manufacturing process and easy maintenance.

Globe valve is generally used, but due to the large opening and closing torque and long structure length, the nominal diameter is generally limited to DN≤200mm or less. The fluid resistance loss of the globe valve is large. This limits the wider use of globe valves.

There are many types of globe valves, which can be divided according to the position of the thread on the stem:

One, on the thread stem stop valve

Globe stem threads outside of body. Its advantage is that the valve stem is not eroded by the medium, easy lubrication, this structure is more common.

Two, down thread stem stop valve

Globe stem threads in body. The stem thread of this structure is in direct contact with the medium, susceptible to erosion and is not lubricated. This structure is used for small diameter and low temperature.

According to the valve channel direction, can be divided into; Straight through globe valve, Angle globe valve and three-way globe valve, the latter two are usually used to change the flow direction of the medium and distribute the medium.

Insulation globe valves can be used in most media flow systems. Various types of globe valves have been developed for various USES in petrochemical, electric power, metallurgy, urban construction and chemical engineering sectors.

The use of globe valve is very common, but due to the opening and closing torque is large, the structure length is long, usually nominal diameter is limited to 250mm below, also to 400mm, but the choice of the need to pay special attention to the import and export direction. Generally, the globe valve medium below 150mm mostly flows in from the lower part of the disc, while the globe valve medium above 200mm mostly flows in from the upper part of the disc. This is due to the consideration of valve closing torque. In order to reduce the opening or closing torque, generally more than 200mm of the globe valve are equipped with internal bypass or external bypass valve.

主站蜘蛛池模板: 久久久精品电影 | 免费在线看污网站 | 国产亚洲精品久久久 | 精品国产一区二区三区av性色 | 亚洲网站在线观看 | 日韩一区二区在线视频 | 国产一区二区黑人欧美xxxx | 国内自拍视频在线观看 | 午夜私人影院在线观看 | 精品久久精品久久 | 色网综合 | 国产精品久久久久久久久久久久久 | 亚洲一区二区三区视频 | 欧美日韩国产中文 | 中文字幕一区二区三区不卡 | 欧美一级免费看 | 午夜视频在线观看视频 | 一级欧美| 欧美日韩一区二区三区不卡视频 | 久久99精品久久久久久国产越南 | 狠狠的日| 91精品国产欧美一区二区 | 91精品国产91久久久久久吃药 | 欧美精品成人一区二区三区四区 | 水密桃av | av免费在线观看网站 | 韩日精品视频 | 精品久久99 | 91亚洲国产 | 日韩免费| 亚洲www啪成人一区二区 | 国产成人精品一区二区三区四区 | 亚洲人成网站b2k3cm | 国厂毛片 | 人人人人澡人人爽人人澡 | 欧美黄色免费网址 | 久久久久久国产精品 | 在线视频 中文字幕 | 精品成人一区二区 | www久| 色天天综合网 |